A ROM has the following time parameters: Maximum Address to valid Data Output…
PYQ GATE 1988
A ROM has the following time parameters:
Maximum Address to valid Data Output delay = 30 n sec.
Maximum Chip Select to valid Data Output delay = 20 n sec.
Maximum Data Hold time (after address change or after chip deselect) = 10 n sec
Assume that,
the chip is selected using one of the address lines, and,
the data setup time is negligible
What is the maximum rate at which a CPU can continuously read data from this ROM?
(Show your calculations step-by-step)
Sign up free to check your answer
Sign up freeLoading lesson…

