A hard disk is connected to a 50 MHz processor through a DMA controller.…

PYQ GATE 1996Modified — slightly modified from the official paper; see the solution

A hard disk is connected to a 50 MHz processor through a DMA controller. Assume that the initial set-up of a DMA transfer takes 1000 clock cycles for the processor, and assume that the handling of the interrupt at DMA completion requires 500 clock cycles for the processor. The hard disk has a transfer rate of 2000 Kbytes/sec and average block transferred is 4 K bytes. What fraction of the processor time is consumed by the disk, if the disk is actively transferring 100% of the time?             

  1. A.

    1.5%

  2. B.

    1%

  3. C.

    2.5%

  4. D.

    10%

Attempted by 104 students.

Sign up free to check your answer

Sign up free

Explore the full course: Zero To Hero

Loading lesson…