Refer to the monostable multivibrator circuit in the figure below. The trigger…
PYQ KVS TGT/PGT 2013
Refer to the monostable multivibrator circuit in the figure below. The trigger terminal (pin 2 of the IC ) is driven by a symmetrical pulsed waveform of 10 kHz. Determine the duty cycle of the output waveform.


- A.
0.56
- B.
0.55
- C.
0.57
- D.
0.58
Attempted by 387 students.
Sign up free to check your answer
Sign up freeLoading lesson…

