Gate 2001_

Duration: 3 min

This video lesson is available to enrolled students.

Return to /learn/DIGITAL-ELECTRONICS/digital-electronics/sequential-circuits/sync-counter-analysis/asset-gate-2001-2617 after enrolling

Inside: a video lesson and guided study material.

Module outline

  1. Digital Electronics: DE One Shot (Semester Edition), Digital Systems & Boolean Basics, Logic Gates & Hardware, Boolean Expression, Boolean Minimization, Combinational Circuit, Sequential Circuits, Number System, Number Representation, Registers and Counters, Boolean Algebra and Logic Gates, Microprocessors and Microcontrollers, Logic Families and CMOS Logic, Microprocessors, Logic Gates and Boolean Algebra, Number Systems and Codes, Minimization of Boolean Functions, Timing, Hazards and Testing, Logic Families, Combinational Logic Design, Arithmetic Circuits, Semiconductor Memories and Programmable Logic Devices, Combinational Logic Circuits, Sequential Circuits and State Machines, Latches and Flip-Flops, Finite State Machines, Minimization of Boolean Functions, Arithmetic Circuits, Registers and Counters, Latches and Flip-Flops, Number Systems and Codes
AI summary & chapters

AI Summary

An AI-generated summary of this video lecture.

The video is a lecture on digital logic design, specifically analyzing a sequential circuit problem from the GATE 2001 exam. The instructor solves a problem involving a 3-bit counter using D flip-flops. He derives excitation equations from the circuit diagram, constructs a state transition table, and traces the state sequence starting from an initial condition to identify the correct option among multiple choices.

Chapters

  1. 0:00 – 2:00 00:00-02:00

    The instructor introduces a GATE 2001 problem involving a circuit with three D flip-flops labeled $Q_0$ (LSB), $Q_1$, and $Q_2$ (MSB). He derives the excitation equations by tracing the connections: $D_0$ is the output of an XOR gate with inputs $Q_2$ and $Q_1$, so $D_{0N} = Q_{2P} \oplus Q_{1P}$. $D_1$ is connected to $Q_0$, so $D_{1N} = Q_{0P}$. $D_2$ is connected to $Q_1$, so $D_{2N} = Q_{1P}$. He then sets up a state transition table with columns for Present State ($Q_{2P}, Q_{1P}, Q_{0P}$) and Next State ($Q_{2N}, Q_{1N}, Q_{0N}$) and begins filling it systematically for all 8 states from 000 to 111.

  2. 2:00 – 3:11 02:00-03:11

    The instructor completes the state table and traces the sequence starting from the initial state $Q_0=1, Q_1=0, Q_2=0$ (decimal 1). He follows the transitions: 1 (001) goes to 2 (010), then to 5 (101), then to 3 (011), then to 7 (111), then to 6 (110), then to 4 (100), and finally back to 1 (001). He draws this cycle on the board to visualize the flow: 1 -> 2 -> 5 -> 3 -> 7 -> 6 -> 4 -> 1. By comparing this derived sequence with the given options, he identifies option (B) '1, 2, 5, 3, 7, 6, 4' as the correct answer.

The lecture demonstrates a systematic approach to analyzing sequential circuits. First, the excitation equations for the flip-flops are derived from the combinational logic feeding their inputs. Second, a state transition table is constructed to map every present state to its corresponding next state. Finally, the sequence is traced starting from the specified initial state to determine the circuit's behavior over time. This method allows for the verification of the circuit's counting sequence against the provided multiple-choice options.

Loading lesson…