Restricted Mode Counter

Duration: 4 min

This video lesson is available to enrolled students.

Return to /learn/DIGITAL-ELECTRONICS/digital-electronics/sequential-circuits/ripple-async-counters/asset-restricted-mode-counter after enrolling

Inside: a video lesson and guided study material.

Module outline

  1. Digital Electronics: DE One Shot (Semester Edition), Digital Systems & Boolean Basics, Logic Gates & Hardware, Boolean Expression, Boolean Minimization, Combinational Circuit, Sequential Circuits, Number System, Number Representation, Registers and Counters, Boolean Algebra and Logic Gates, Microprocessors and Microcontrollers, Logic Families and CMOS Logic, Microprocessors, Logic Gates and Boolean Algebra, Number Systems and Codes, Minimization of Boolean Functions, Timing, Hazards and Testing, Logic Families, Combinational Logic Design, Arithmetic Circuits, Semiconductor Memories and Programmable Logic Devices, Combinational Logic Circuits, Sequential Circuits and State Machines, Latches and Flip-Flops, Finite State Machines, Minimization of Boolean Functions, Arithmetic Circuits, Registers and Counters, Latches and Flip-Flops, Number Systems and Codes
AI summary & chapters

AI Summary

An AI-generated summary of this video lecture.

The video lecture focuses on analyzing a "Restricted mod counter" circuit to determine its counting sequence. The instructor, Sanchit Jain Sir, presents a digital logic circuit diagram featuring three T-flip-flops (labeled T0, T1, T2) and a NAND gate. The circuit is analyzed using a state table with columns Q2, Q1, Q0. The goal is to identify the sequence of states the counter goes through before resetting. The instructor explains the connections and logic levels to derive the final modulus of the counter.

Chapters

  1. 0:00 – 2:00 00:00-02:00

    The instructor introduces the problem statement: "Consider a restricted mod counter and find what sequence it is counting?" He displays a circuit diagram with three T-flip-flops and a NAND gate, alongside a blank state table. He begins analyzing the circuit, noting that T0 is connected to +5V (logic 1), causing it to toggle on every clock pulse. He traces the connections where T1 is driven by Q0 and T2 by Q1. He starts filling the state table, transitioning from the initial state 000 to 001, explaining the toggle behavior. He points to the NAND gate inputs, identifying them as connected to Q2 and Q0, setting up the reset logic analysis. He explains that for the NAND gate to output a 0 (reset signal), both inputs must be 1.

  2. 2:00 – 3:58 02:00-03:58

    The instructor completes the state table analysis, identifying the specific state that triggers the reset. He highlights that when the counter reaches state 101 (Q2=1, Q1=0, Q0=1), the NAND gate inputs are both high, producing a low output. This low signal activates the active-low CLR inputs, instantly resetting the counter to 000. He circles the states 101, 110, and 111 in the table, marking them as transient states that are skipped. Finally, he writes "mod 5" on the board and draws a sequence loop (0 -> 1 -> 2 -> 3 -> 4 -> 0), concluding that the circuit functions as a Mod-5 counter counting from 0 to 4. He emphasizes that the counter never stays in the state 101.

The video provides a step-by-step analysis of a restricted mod counter circuit. The instructor uses a state table and circuit diagram to trace the logic transitions of three T-flip-flops. By identifying the feedback loop involving a NAND gate connected to Q2 and Q0, he determines that the counter resets upon reaching the binary state 101. This reset mechanism truncates the natural binary sequence, effectively creating a Mod-5 counter that cycles through states 0, 1, 2, 3, and 4 before returning to 0. The lecture emphasizes the importance of analyzing feedback paths to determine the modulus of sequential circuits. The instructor demonstrates how to predict the behavior of digital logic circuits by combining theoretical knowledge of flip-flops with practical circuit tracing.

Loading lesson…