Implementing 4x1 Multiplexer

Duration: 5 min

This video lesson is available to enrolled students.

Return to /learn/CDAC-C-CAT-COMPLETE-PREPARATION/section-c-digital-electronics/combinational-circuit/multiplexers-mux/asset-implementing-4x1-multiplexer after enrolling

Inside: a video lesson and guided study material.

Module outline

  1. Section A | English: Vocabulary, Comprehension / Reading Comprehension / Unseen Passages (Critical Reasoning) (Paragraph Questions), Preposition, Sentence Correction (Error Correction), Sentence Completion (Fill in the blanks), Articles, Sentence Re-arrangements (Para Jumbles) (Narrative Sequencing), Verbal Analogy (Word Based Analogy)
  2. Section A | Quant Aptitude: Ratio and Proportion (Ratios), Mixture and Alligation, Permutation and Combination, Number System, HCF LCM, Sequence and Series (Series), Speed Time and Distance, Arithmetic, Algebra, Powers and Exponents (Surds and Indices), Average, Age Problems, Percentage, Profit and Loss, Partnership, Time and Work, Simple Interest and Compound Interest, Mensuration and Geometry, Probability, Pipe and Cistern
  3. Section A | Reasoning: Series (Number and Letter Series) (Numerical Relations and Reasoning), Coding Decoding, Data Sufficiency, Calendar, Clock, Blood Relations, Directions (Direction Test), Seating Arrangements, Ranking, Order and Sequence, Puzzle Solving (Puzzles)
  4. Section B | C Programming: C Programming by Yash Sir, Coding Questions by Yash Sir
  5. Section B | Data Structures: Algorithm Analysis, Greedy Algorithms, Time Complexity Analysis, Sorting Algorithms, Introduction to DS, Array, Stack, Queue, Linked List, Tree, Graphs
  6. Section B | OOP (C++): Object Oriented Programming (OOPS), Programming in C++
  7. Section B | OS: Introduction to OS, Process Management, CPU Scheduling, Process Synchronization, Threads & Process Creation, Deadlock, Memory Management, Virtual Memory, Disc Scheduling, File Management, Windows OS
  8. Section B | Networking: Introduction to CN, Data Communication, DLL: Access Control, DLL: Flow Control, DLL: Error Control, DLL: Framing, Data Link Layer - Ethernet, Net Layer: IPv4 & Proto, Net Layer: IP Addressing, Net Layer:Routing Protocol, Transport Layer Services, TL: Congestion & UDP, Application Layer, Hardware basics
  9. Section B | AI & Big Data Basics: AI & ML by Arun Sir, Big Data Systems
  10. Section C | Digital Electronics: Digital Systems & Boolean Basics, Logic Gates & Hardware, Boolean Expression, Boolean Minimization, Combinational Circuit, Sequential Circuits, Number System, Number Representation, Analog-Digital Conversion
  11. Section A, C | Comp. Fundamentals, COA: Basics of COA, Floating Point Rep, Cache Memory Organization, Input Output Organisation, Pipelining, Instr Formats & Modes, Control Unit Design, Register Transfer and Microoperations, Multiprocessors, Programming the Basic Computer
  12. MOCK TEST:
AI summary & chapters

AI Summary

An AI-generated summary of this video lecture.

The video presents a detailed case study on the implementation of a 4-to-1 Multiplexer (MUX). The instructor begins by outlining the circuit specifications, which include four data input lines labeled I0, I1, I2, I3, a single output line Y, and two selection lines S0 and S1. He proceeds to draw a standard block diagram representing the MUX, clearly labeling all inputs and outputs. Following the diagram, he constructs a truth table to define the logical relationship between the selection lines and the output. Finally, he demonstrates the logic gate implementation using AND and OR gates and derives the corresponding Boolean expression for the circuit.

Chapters

  1. 0:00 – 2:00 00:00-02:00

    The lecture starts with the problem statement displayed on the screen: "Case study of 4 to 1". The instructor reads the text describing the circuit components: "four data input lines I0, I1, I2, I3 one output line Y, and two selection line S0 and S1". He then draws a rectangular block on the whiteboard to represent the MUX. Inside the block, he writes "MUX 4x1". He draws four horizontal lines on the left side for the data inputs and labels them sequentially as I0, I1, I2, I3. On the right side, he draws a single line for the output and labels it Y. At the bottom of the block, he draws two vertical lines representing the selection inputs, labeling them S1 and S0. This visual setup establishes the basic structure of the multiplexer before diving into logic.

  2. 2:00 – 5:00 02:00-05:00

    The instructor moves to the right side of the board to create a truth table. He draws a table with headers "I/P" (Input) and "O/P" (Output). Under "I/P", he lists the selection variables S1 and S0. He fills the rows with binary combinations: 00, 01, 10, and 11. In the "O/P" column labeled Y, he maps the output to the corresponding data input based on the selection value: I0 for 00, I1 for 01, I2 for 10, and I3 for 11. Next, he begins drawing the logic circuit diagram. He sketches four AND gates arranged vertically and one OR gate to the right. He connects the data inputs I0 through I3 to the second input of each respective AND gate. He then connects the selection lines S1 and S0 to the first inputs of the AND gates. Crucially, he adds inversion bubbles (NOT gates) to the selection line inputs for the first two AND gates to represent the complemented variables required for the logic.

  3. 5:00 – 5:27 05:00-05:27

    In the final segment, the instructor writes the complete Boolean expression at the very top of the whiteboard. The equation is written as Y = S1'S0'I0 + S1'S0I1 + S1S0'I2 + S1S0I3. He points to the terms in the equation and correlates them with the specific AND gates in the circuit diagram he just drew. This step solidifies the connection between the truth table, the physical gate arrangement, and the mathematical representation of the 4-to-1 MUX.

The video provides a comprehensive walkthrough of designing a 4-to-1 Multiplexer from scratch. It progresses logically from defining the problem statement and drawing the block diagram to establishing the truth table. The instructor then translates this truth table into a physical logic circuit using basic gates (AND, OR, NOT) and concludes by writing the canonical Sum of Products (SOP) Boolean expression. This sequence effectively demonstrates how digital logic components are analyzed and implemented.

Loading lesson…