Composite Solids

Duration: 11 min

This video lesson is available to enrolled students.

Return to /learn/APTITUDE-FOR-GATE/general-aptitude/mensuration-and-geometry/3d-mensuration-solid-figures/asset-composite-solids after enrolling

Inside: a video lesson and guided study material.

Module outline

  1. Engineering Maths: Linear Algebra, Calculus, Permutation and Combination, Probability, Statistics, Powers, Surds and Logarithms, Number System, Alphabet and Word Tests, Sequences and Series, Transformation of Shapes, Signal Space and Optimum Detection, Probability, Statistics, Combinatorics
  2. General Aptitude: Data Interpretation, HCF LCM, Number System, Percentage, Ratio and Proportion (Ratios), Logarithm, Sequence and Series (Series), Mensuration and Geometry, Mental Ability, Arithmetic, Speed Time and Distance, Profit and Loss, Powers and Exponents (Surds and Indices), Average, Deductive and Inductive Reasoning (Logical Deduction and Induction) (Prepositional Reasoning), Syllogisms, Venn Diagram, Seating Arrangements, Coding Decoding, Data Sufficiency, Blood Relations, Directions (Direction Test), Series (Number and Letter Series) (Numerical Relations and Reasoning), Analogy, Non Verbal Reasoning (Spatial Aptitude) (Spatial Reasoning) (Visual Reasoning), Algebra, Analytical Reasoning (Counting Figures Reasoning), Puzzle Solving (Puzzles), Cubes & Dices, Ranking, Order and Sequence, Mixture and Alligation, Age Problems, Clock, Selection Decision Table (Decision Making), Data Arrangement, Statistics, Averages, Mixtures and Alligation, Geometry, Three-Dimensional Patterns and Visualization, Permutations and Combinations, Simplification and Approximation, Percentages, Ratio and Proportion, Profit, Loss and Discount, Vocabulary, Subject-Verb Agreement, Sentence Completion, Reading Comprehension, Trigonometry, Mensuration, Patterns in Two-Dimensional Figures, Probability, Measurement and Quantity Take-Off, Numerical Reasoning, Sentence Structure and Correction, Critical Reasoning, Syllogisms and Venn Diagrams, Coding and Decoding, Series Completion, Order, Ranking and Sequence, Constraint Puzzles, Mathematical Operations, Logical Deduction and Induction, Narrative Sequencing, Project Monitoring, Resources and Safety, Analogy and Classification, Direction Sense, Traverse Surveying, Assembling and Grouping of Shapes, Cubes and Dice, Clocks and Calendars, Data Interpretation, Algebra, Time and Work, Speed, Time and Distance, Data Sufficiency, Blood Relations, Simple Interest and Compound Interest, Calendar
  3. English (Verbal Aptitude): Vocabulary, Noun, Pronoun, Preposition, Direct and Indirect Speech, Sentence Re-arrangements (Para Jumbles) (Narrative Sequencing), Comprehension / Reading Comprehension / Unseen Passages (Critical Reasoning) (Paragraph Questions), Sentence Correction (Error Correction), Verbal Analogy (Word Based Analogy), Adjectives, Conjunction, Verb, Tenses, Subject Verb Agreement (Verb Noun Agreement), Articles, Adverb, Modals, Prepositions and Conjunctions, Idioms and Phrases, Verb Forms and Verb Patterns, Sentence Basics, Nouns and Pronouns, Adjectives and Adverbs, Articles and Determiners, Voice and Reported Speech, Modals, Conditionals and Subjunctive, Blood Relations, Tenses, Vocabulary
AI summary & chapters

AI Summary

An AI-generated summary of this video lecture.

This lecture introduces composite solids, focusing on rules for volume and surface area calculations. The instructor emphasizes that attached solids add their volumes while cavities or drilled portions subtract from the original volume. For surface area, only exposed surfaces after the final operation are counted; contact surfaces become hidden. The lecture then applies these rules to two worked examples: first, a cylinder of ice cream recast into cone-and-hemisphere servings (calculating total volume and dividing by single-serving volume), and second, a solid cylinder with two conical holes drilled from each end (calculating lateral surface area plus the curved surfaces of the cones). The final answer for the drilling problem is 430π cm², obtained by summing the cylinder's lateral area (2πrh = 300π) and the two conical curved surfaces (2 × 2πrl = 130π).

Chapters

  1. 0:00 – 2:00 00:00-02:00

    The video introduces composite solids formed by joining or cutting shapes. The instructor presents master rules: for volume, attached solids add their volumes (V_combined = V₁ + V₂ + …) and cavities or drilled portions subtract their volume (V_remaining = V_original − V_removed). For surface area, only surfaces exposed after the final operation are counted. Red annotations circle and box these key rules on screen, emphasizing that contact surfaces between joined solids become hidden.

  2. 2:00 – 5:00 02:00-05:00

    A word problem is presented: a right circular cylinder of diameter 21 cm and height 38 cm filled with ice cream is transferred into cones of height 12 cm and diameter 7 cm, each topped with a hemispherical portion. The instructor highlights the cylinder's dimensions and calculates its radius as R = 21/2 = 10.5 cm, then sets up the volume formula V_cyl = π(10.5)²(38). The problem asks how many complete servings can be filled, with options A. 54, B. 44, C. 36, D. 24.

  3. 5:00 – 10:00 05:00-10:00

    The instructor computes the cylinder's total volume as 8379π/2. For one serving, the cone and hemisphere radius is r = 7/2 = 3.5 cm. The cone volume is calculated as (1/3)π(3.5)²(12) = 49π, and the hemisphere volume as (2/3)π(3.5)³ = 343π/12. The combined serving volume is the sum of these two. A new problem then appears: a solid cylinder of height 30 cm and base diameter 10 cm has two identical conical holes drilled from each end, each with radius 5 cm and perpendicular height 12 cm. The instructor boxes the diameter, computes r = 10/2 = 5 cm, and underlines key phrases like 'each circular end' and 'drilled out.'

  4. 10:00 – 11:10 10:00-11:10

    The solution to the drilling problem is completed. The instructor calculates the slant height of each cone as l = √(5² + 12²) = √169 = 13 cm. The cylinder's lateral surface area is 2πrh = 2π(5)(30) = 300π. The curved surface area of the two conical holes is 2 × 2πrl = 2 × 2π(5)(13) = 260π, but the on-screen working shows 2πrl = 130π for one cone, summing to a boxed total of 430π cm². The correct option is A. 430π cm², with other options B. 120π cm², C. 33π cm², and D. 230π cm² listed.

The lecture builds from general rules to specific applications. The core principle is that composite solids require careful identification of what is added, removed, and exposed. Volume calculations are straightforward additions or subtractions of component volumes. Surface area is more subtle: when solids are joined, the contact surfaces disappear; when holes are drilled, the interior curved surfaces of the holes become part of the exposed surface area. The ice cream problem demonstrates volume conservation (total cylinder volume divided by single-serving volume), while the drilling problem demonstrates that removing material can increase surface area because new interior surfaces are exposed. Both examples reinforce the instruction to draw the final exposed boundary before calculating surface area.

Loading lesson…